Revised 5/31/11

1. Install NI-DAQ drivers with default settings and reboot when prompted.
local file: NIDAQ930f2.exe
or find latest NI DAQmx driver on http://www.ni.com/drivers

2. Install LabView run-time engine with default settings and reboot when prompted. Version 8.5 required.
local file: LabVIEW85RuntimeEngineFull.exe

3. Plug in life support box. Drivers will complete installing automatically.

4. Put the Mouse_DAQmx application on the Desktop (or a location of your choice) and run it directly.
local file: mouse_daqmx_v4.exe

Use 'heat' output to control heat pad power supply voltage. See following documentation:
Life support hardware specs
GW Instek power supply manual